Share This Article
Swimming pool cleaning can be a daunting task. It seems like time you clean it, the water gets dirtier and the work gets harder. In this guide, we will walk you through how to clean swimming pools easily by yourself. We will discuss the different types of pools, how to clean the pool water, how to clean grout in a swimming pool, pool surface cleaning, and how to clean pool tile. So gather your supplies and get ready to tackle that swimming pool!
Read on to find out how to clean your pool yourself.
How to clean a pool depending on its type
There are many different types of swimming pools, each with their own set of cleaning challenges.
Above ground pools
These pools are typically easier to clean than in-ground pools. The walls and liner of the pool can be cleaned with a hose and brush. You will also need to vacuum the floor of the pool to remove any dirt or debris.
In-ground pools
These pools require more work to clean than above ground pools because they are harder to access. You will need to brush and vacuum the walls and floor of the pool. You may also need to use a swimming pool tile cleaner to clean the tiles around the pool.
Fibreglass pools
Fibreglass pools are easy to maintain and only require occasional cleaning. The smooth surface of fibreglass pools means that dirt and debris do not adhere to the sides of the pool. You will only need to vacuum the floor of the pool to remove any dirt or debris that has accumulated.
Concrete pools
If you’re wondering how to clean a very dirty pool that’s made of concrete, we’ve got you covered! Concrete pools are difficult to clean and require a lot of work. One of the best ways to clean this type of pool is by using a pool stone pumice cleaning block and a lot of elbow grease.
Pebblecrete pools
If you’re wondering ‘how to clean a pebblecrete pool’ you’ve come to the right place. Pebblecrete pools are also quite difficult to clean and require a lot of work because of their pebble surface. Chemicals such as chlorine help to remove stains from this type of pool.
How to clean your pool water
Sometimes regular pool care gets away from us. While you may have a pool pump, a pool filter system, an automatic pool cleaner (e.g. robotic cleaners), and occasionally do manual cleaning with a pool skimmer to remove floating debris, sometimes dirt just builds up. Stop wondering how to clean swimming pool water thanks to our handy pool maintenance tips.
If you have a green pool, you don’t need to hire pool cleaning services. We’ve got just the tips you need to clean your own pool, restore chemical balance, and stop algae growth all by yourself!
Here are some pool chemicals that you can use when cleaning pool water:
Chlorine
There are a few different ways to clean pool water but a common method that most pool owners use to clean their pool’s water is to use chlorine tablets. Once you’ve bought some, you will need to place the tablets in the skimmer basket and let them dissolve. The chlorine will kill any bacteria or algae that is in the water.
Another way to clean pool water with chlorine is to ‘shock the pool’. This is done by adding a large amount of chlorine all at once. This will kill any organisms that are living in the swimming pool water. Just make sure to have the chlorine levels stable before you go swimming again!
For round-the-year care, chlorine should be added regularly. If you’re not up to constantly using chlorine tablets, you could invest into an automated chlorine system. By feeding chlorine into the water through the pool’s filtration system, you’ll be able to keep your pool clean easier.
Bromine
How to clean a pool without chlorine? Bromine is another common swimming pool sanitizer that can be used to clean your swimming pool water. Bromine works in a similar way to chlorine as it kills the bacteria and algae that is living in the water. Bromine is often used in hot tubs as it’s less irritating to the skin than chlorine. However, for outdoor pools, chlorine is typically used instead of bromine as it’s more effective and longer-lasting in higher temperatures.
pH balancers
pH balancers are chemicals that help to maintain the pH level of your pool water. As it’s important to make sure that the pH levels of your swimming pool’s water are balanced, this product could be crucial for the safety and cleanliness of your water.
If the pH levels are too high or too low, it can be irritating to your skin and eyes. The ideal pH level for swimming pool water is between 7 and 7.6 and you can test these levels with a swimming pool test kit. This will help you to determine if the levels are incorrect and the quantity of chemicals that you may need to add to balance the pH levels.
What can I use to clean my pool walls?
Let’s face it, pool walls can become dirty or discoloured pretty easily thanks to organic debris, grout, and strains. But never fear, we know what is needed to clean a pool! Here are some options for cleaning those stubborn pool wall stains:
- Chlorine-based cleaners
- Tile/ pool brushes
- Pool vacuum
- Heavy duty disinfectant cleaners
- Vinegar, baking soda, and hot water mixture
- Gumption
- Pool stone pumice
- Algae remover
How to clean a dirty pool tile?
Cleaning your swimming pool tiles is an important part of keeping the pool clean and swimmable. Over time, it’s common for swimming pool tiles to become stained, covered in muck or filled with grout. To clean swimming pool tiles, you will need to use a brush and a tile cleaner or even some of the other cleaning items listed above. Be sure to read the instructions on any tile cleaner before using it. Some cleaners are strong and can damage swimming pool tiles if used incorrectly.
How to clean tile in salt water pool or chlorine pool using a household solution
To make your own cleaning solution out of products you have lying around the house, mix one part vinegar with three parts hot water in a bucket. Dip your brush into the bucket and scrub the stained areas of the swimming pool tiles then spread a small amount of baking powder over the dirty area to create a paste. After leaving the paste for a few minutes, scrub the area again, rinse it with clean water, and voila! You’re finished!
How to clean calcium buildup on pool tile
Calcium is a stubborn mess to try and clean. But don’t worry, we’ll teach you how to clean pool tile calcium deposits, and how to clean a swimming pool fast!
The best way to clean calcium from your pool fast is to get your hands on a calcium releaser. This will decrease the amount of time you could waste fruitlessly scrubbing at the deposit without any results. If you can, try to stick with acid-free products to help protect the finish on your pool. If this treatment doesn’t work, a pumice rock or scaling treatment could also be the ‘how to clean calcium from pool tile’ answer that you’re looking for.
How to clean the bottom of a pool
The bottom of the swimming pool can be difficult to clean as debris falls into the pool, sinks, and settles in a hard to reach area. To clean the bottom of the swimming pool, you could use a brush and a vacuum.
To use a manual swimming pool vacuum, dip the head of the vacuum into the water and turn it on. Move the vacuum around the bottom of the swimming pool until the entire area has been vacuumed to remove any dirt, bugs, or debris. If you have a swimming pool that is difficult to clean, or if you want a more hands-off approach to pool maintenance, you may want to consider using a swimming pool robot. Swimming pool robots are designed to clean the entire swimming pool for you. To use a swimming pool robot, simply place it in the swimming pool and let it do its job.
Now that you know how to clean a swimming pool, it’s time to get started! Gather your supplies and follow the steps above to get your swimming pool sparkling clean! Thanks for reading our pool cleaning guide!
